The electric strikes or also called door openers, are electromechanical devices that are installed in the door frame to allow accessibility to a building remotely. They are mechanisms used as an integral part of an access control system.
See products
Basic
They are models with specific voltages. We can customize the voltage upon customer's request.
Dual
Incorporan un selector de voltaje o switch disponibles en un rango de 12/24V AC < 1min y 12/24V DC 100% ED.
Universal
Multivoltage for easy selection. They offer a range between 9-24V AC/DC and 22-28V AC/DC.
Electronics
The all-in-one of the electric strikes. They incorporate an intelligent microprocessor that offers a range between 8-30V AC/DC ED 100%.
Each and every element that makes up our electrical and electronic electric strikes is part of OPENERS & CLOSERS DNA. We create complex and carefully designed mechanisms for long-lasting and reliable operation.
The covers close the entire mechanism by means of two or three screws to ensure optimum fastening and prevent its interior from being opened during normal operation.
These are the essential parts for proper operation. They must be perfectly aligned to withstand high impacts, but at the same time slide smoothly to allow efficient release. The key is to know how to find the perfect balance.
The heart of every electric strike or electronic is in the perfect winding. Its function allows to activate the core at a specific speed that allows the release of the short lever.
All electric strikes incorporates state-of-the-art electronic components for improved reliability and better performance and functionality.
The shafts allow the short, long and latch levers to rotate. Their function is to support the impacts. Their resistance will vary according to the diameter and the material of manufacture. For a good durability, it is important to use resistant materials.
Its function is to adapt to the sliding of the locks. It is the part that must withstand the greatest impacts and be able to open and close doors efficiently. They offer a great variety of adjustments, depth and degrees of rotation.
The corner piece of all electric strike or electronics, it protects the mechanism from unwanted impacts or vibrations.
The simplest, yet ingenious power strip. All our electrical or electronic electric strikes incorporate transient voltage suppression (TVS) to protect circuits from sudden or momentary overvoltage conditions. In addition, the electrical wiring can be connected either +/- AC alternating current or DC direct current as it does not offer polarity.
Fail-Secure functionality refers to models that are normally closed without electrical connection. The electric strike is unlocked only when the solenoid is energized. In the event of power loss, the door will remain closed.
Fail-Safe functionality refers to models that are normally open without electrical connection. The electric strike is unlocked only when the solenoid is deactivated. In the event of power loss, the door will remain open.
R(EVOLUTION)
Now you can push the open button and the solenoid will never burn out when connected to AC power within the voltage range. Also its advantage is that you reduce the model stocking.
The M2 microchip is the second generation of OPENERS & CLOSERS microprocessors that allow to store more information and provide a more instantaneous opening response.
The programming is in charge of controlling the temperature of the electronic strike so that it does not exceed 40°C. This improves performance, increases the number of openings where the flow rate is high and avoids possible burns with the faceplate.
The electronic strike is now much quieter with the new M2 microprocessor, only 65-69 decibels (db) at 0.4 seconds.
It allows the door to be unlocked in microseconds with almost no perceived noise, but just enough to indicate actuation.
For situations where noise can be an inconvenience, we have the possibility to customize the electronic electric strikes at the request of our customers, reducing the decibels or eliminating it completely.
We facilitate the opening of heavy doors over 200kg up to 650N of lateral pressure in a timely manner (certified durability tests can only be done up to 250N).
We are aware of the importance of energy efficiency in construction. The energy consumption of our electronic electric strikes is incredibly low.
Depending on AC or DC current consumption, they vary from a minimum of 0.03 A to a maximum of 0.14 A in maintenance consumption.
The solenoid is in charge of managing the lock release power and in cases of continuous DC connection, these usually increase their temperature reaching sometimes up to 50ºC. With the electronic models, we stabilize the temperature so that it does not exceed 40ºC in direct current ED100%. A very convenient solution for wooden profiles
The internal radian latch has a shallower depth, but keeps the tip of the latch within the arc whose length is that of the radius.
The external radian latch has a greater depth and does not keep the latch tip inside the arc whose length is that of the radius.
In places such as offices, stores or customer service centers, keeping doors open can create a welcoming feeling and ease of access for visitors.
The manual release system consists of moving the striker lever to allow manual opening.
Its central activation will keep the strike permanently unlocked.
Only when the door has been opened will the automatic mechanism relock.
There are 3 types of systems, the bushing system, the external lever on the latch and the newest system on the latch shaft.
Regardless of whether the door is open or closed, after a few seconds the striker will lock automatically, this being the option that offers greater security.
Door monitoring is a crucial system in security and access management. This process involves the use of sensors and electronic devices to monitor the status of doors in real time.
There is the possibility of detecting the door and strike status with one or two microswitches.
We offer the widest range of functionalities per product series in the market. We can adapt electric strikes to any solution and we manage to build functions on demand for our customers.
For the electronic electric strikes we have managed to combine the 2 types of current to offer greater flexibility, reduce product stocking and above all, to be able to open with high preloads on the doors for continuous currents ED 100%.
Here you will find all our electric and electronic electric strikes series. Select one to see its models and configuration options.
2024
Download catalogue
