Electromagnetic shear locks or commonly referred to as Shearlock offer an optimal and secure solution to any swing or swing door.
The Shearlock incorporates metal pins that increase the lock of the door.
We've added 3 sensors for improved adjustability with the door.
The closing force (maximum pressure) is higher than conventional electromagnetic locks and can be connected to heat and smoke detectors, coded keypads, as well as various access control systems.
SH Series Instructions
We have SH locks available for any type of installation, whether on glass, wood or metal doors, recessed or overlay and whatever type of frame they have.
In addition, thanks to their small size and adaptability, they can be installed discreetly on any door.
Electromagnetic and mechanical force to achieve a holding force up to 3 times higher than with an electromagnetic lock Fail-secure.
When an electric current is applied to the lock, a magnetic field is created which causes the plate to adhere to the magnet. This locks the door and prevents it from opening.
Green LED: Indication of the opening of the Shearlock for access.
There is the possibility to time the opening or to keep the system open.
Yellow LED: An amber LED indicates an anomaly or transient condition.
Alignment or system malfunction should be checked.
Red LED: A magnetic sensor detects the alignment of the Shearlock and commands it to lock.
In case of a wrong locking it will make 5 locking attempts before activating the flashing acoustic signal.
SH Series
They offer superior strength to conventional electromagnetic locks and can be connected to heat and smoke detectors, coded keypads, as well as various access control systems.
Indication of the opening and closing time of the Shearlock for access from 1 to 25 seconds.
T1: Closing delay setting.
T2: Opening delay setting.
A magnetic sensor detects the alignment of the Shearlock and commands it to lock. In the event of an erroneous locking it will make 5 locking attempts before activating the flashing acoustic signal.
Surface mount/ Surface mount
Closing force: 1,500 daN/3300 lbf
12-24V DC
38 mm x 38 mm x 220 mm
38 mm x 38 mm x 220 mm
Door Status
LED
Timer
Flush mount / Surface mount
Closing force: 1,500 daN/3300 lbf
12-24V DC
34 mm x 35 mm x 266 mm
38 mm x 38 mm x 220 mm
Door Status
LED
Timer
Surface mount/ Glass
Closing force: 1,500 daN/3300 lbf
12-24V DC
38 mm x 38 mm x 220 mm
38 mm x 46.5 mm x 220 mm
Door Status
LED
Timer
Flush mount / Flush mount
Closing force: 1,500 daN/3300 lbf
12-24V DC
34 mm x 35 mm x 266 mm
34 mm x 35 mm x 266 mm
Door Status
LED
Timer
Glass / Crystal
Closing force: 1,500 daN/3300 lbf
12-24V DC
38 mm x 46.5 mm x 220 mm
38 mm x 46.5 mm x 220 mm
Door Status
LED
Timer
Flush mount / Glass
Closing force: 1,500 daN/3300 lbf
12-24V DC
34 mm x 35 mm x 266 mm
38 mm x 46.5 mm x 220 mm
Door Status
LED
Timer
